INTRODUTCION

[Гость daf]

 

INTRODUTCION

Energy Sistem™ thank you for purchasing this Energy Bluetooth Music Box z30. We hope you will enjoy it.

We recommend you to read the following user manual in order to take the most advantage from your product, on a safely way and with the best performance.

CARE AND MAINTENANCE

≥ Do not show your Energy™ Bluetooth Music Box z30 to impacts, dust or even high temperatures.

≥ Do not use corrosive or abrasive cleaning products.

≥ Keep the device clean and without dust.

≥ Do not disassemble the device. Any repair should be done by the qualified staff of Energy Sistem Soyntec, S.A.

≥ Keep your Energy Bluetooth Music Box z30 far form water or humidity, that one can be harmful for both speakers or for the amplifier.

≥ Make sure that your Energy Bluetooth Music Box z30 is off while you are not using it.

≥ Recharge your Energy Bluetooth Music Box z30 battery when it has run down totally.

≥ Do not interrupt the recharge process of the battery of the Energy™ Bluetooth Music Box z30 until the device has been recharged.

19

TECHNICAL SPECIFICATION

≥ Bidireccional Bluetooth®.

≥ Version 3.0, class II.

≥ Supports A2DP and AVRCP profiles.

≥ Easy sync with tablets, smartphones, Laptops, Mac, PC any other devices with Bluetooth®.

≥ Plays MP3 files from SD/SDHC/MMC cards with capacity up to 32 GB.

≥ USB memory decoder: plays MP3 files from USB memory drives with capacity up to 32 GB.

≥  2.0 loudspeakers with acoustic enhancement system.

≥  Total output power (RMS): 6 W.

≥   Frequency response: 90 Hz ~ 20 KHz.

≥   S/N ratio: >80 dB.

≥   FM radio function.

≥   3.5 mm "line-in" port.

≥   Rechargeable lithium battery.

≥   USB battery charger.

PRODUCT CONTENT

Energy Bluetooth Music Box Z30.

≥ Rechargeable lithium battery.

≥ Audio cable: 3.5mm.

20

≥ USB 2.0 cable for battery charge.

≥ Carrying case.

≥ User manual.

GENERAL OVERVIEW

1.     "Line-in » port.

2.    SD/SDHC cards port.

3.    USB port.

4.    USB port battery charger.

5.    Headphones output

6.    LED : mode indication lights. 7 .     Battery cover.

8.    Play/pause

9.    MODE.

10.   Backwards/ Volume-.

11.    Forwards/Volume+.

 

21

RECHARGE THE BATTERY

Install universal BL-5C lithium battery in Energy Bluetooth Music Box z30 (7) by matching the connection pins and close the battery cover.

In order to recharge the battery, switch off the Energy Bluetooth Music Box z30 device and connect the mini USB connector of USB cable into the battery power plug (4), then connect the other end of the USB power cable into a free USB port of your computer or other recharge device by USB.

Switch on the Energy Bluetooth Music Box z30, by pressing the on/off switch (8) and start to enjoy it.

When the battery has been run down the red LED will blink repeatedly. From that moment, it is recommended recharging the battery.

IMPORTANT: In order to keep the battery in good conditions, it is highly recommended not to recharge the battery until it is completely empty. By the same way, do not interrupt the charging process until the battery is completely charged, with the red indicator light switch off.

GENERAL FUNCTIONS

The Energy Bluetooth Music Box z30 is a portable MP3 player with Bluetooth® tecnology. Enjoy your music from pen drives or SD cards, as well as ply your musicwithout cables through the Bluetooth® tecnology from tablets, smartphones, laptops, etc. FM radio and recargable battery..

During the radio FM function and “line-in” blue colour LED function (2) will be blinking. While playing MP3 files through USB memory sticks or SD/ MMC cards, the blue LED (1) will blink faster.

In order to select different functions, press MODE (9). This will help you to select between the available functions of the connecting devices. The correct switching orden is: Bluetooth®, “line-in”, Radio FM , USB and SD/ MMC.

22

BLUETOOTH® FUNCTION

When you turn on your Energy Bluetooth Music Box z30 you start with the Bluetooth® function, you will see the LED flashing, that means that it is searching another Bluetooth® device to sync. In that moment you have to sync with your Bluetooth® audio device, like smartphone, tablet, PC, Mac, etc. You will find the Energy Bluetooth Music Box z30 as “Music Box BT”.

Having the “Music Box BT” detected in your Bluetooth device, you just have to select it and connect, after some seconds you will have the connection is done. It is no necessary introduce any code.

Now you can start to use the wireless Bluetooth connection to play your music.

If you want to connect another audio Bluetooth device you have to keep pressed the MODE button (9) during 6 seconds in order to start with a new search. You have to follow the same steps than before.

RADIO FM FUNCTION

Before using radio function, firstly you have to search the available radio channels and will save them for visualising them later. It is not necessary to repeat this search unless change of location of modification of the radio stations’ signal.

To search radio channel, press and keep pressing the play/pause button (8) during 3 seconds. This will save all stations founded in the internal memory of the device. This process may take a few minutes.

In order to select between different stations, you have just to press forward button (11) or backward button (10). Stations will appear at the same order as they were saved.

IMPORTANT NOTE: If you want to improve the reception quality of the radio stations, connect USB recharge cable, as a receiving antenna.

23

LINE-IN FUNTION

To use the line-in function, connect the audio cable in the line-in plug with the output (5) of other audio device, like MP3 player, player, mini music system, etc.

In line-in function, the Energy Bluetooth Music Box z30 is in speakers’ mode, what you will play on the audio device will be listen in your Energy Bluetooth Music Box z30. Besides, if you change all adjustments such as the volume or sound EQ on the external player, these changes will be applied to the audio Energy Bluetooth Music Box z30.

MP3 FUNCTION WITH EXTERNAL MEMORIES

In order to play MP3 files, insert an external memory such as a USB stick or a SD/MMC memory card in the corresponding slots; (4) and (3) respectively.

If you switch off the Energy Bluetooth Music Box z30 or remove the external memory of your device. By this way, when you insert again the same external memory, the lecture will continue at the same instant that you ended previously.

To go forward another track, use next (11) and back (10) buttons. This will go directly to next track, press and keep MODE (9) button pressed, during 2 seconds.

24

PLAYBACK ORDER

The folders included in the memories are read in writing chronological order and all songs contained in these folders are read in alphabetical order.

For example: if after copying two folders of music called ‘A’ and ‘B’, we can copy first folder ‘B’ and later folder ‘A’, so the first played song will be first song in alphabetical order of ‘B’ folder.

Here you have a diagram of the reading order:

2

WARRANTY

Energy Sistem Soyntec SA is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty period of 12 months.

This warranty covers any defects in workmanship or materials. This warranty doesn’t cover any failure of the product due to accidents, misuse or alteration made by an unauthorized person.

The special 36-months warranty is valid for the European Union. For other countries, please refer to your specific legislation or your local distributor.

WARRANTY PROCEDURE

1.     Visit the Support section at http://support.energysistem.com http:// support.soyntec.com and select your product to view the FAQ (Frequently Asked Questions), user manuals, drivers and updates available, as the possibility to submit a query to the Technical Service or consult the warranty.

You can check the availability of the user manual in your language at http://www.energysistem.com/en-en/support/manuals

2.    Alternatively, you may prefer to contact the distributor from which you purchased the product, presenting the purchase receipt or invoice.

Important: This warranty doesn’t cover any damage or loss to any data stored in the product memory, therefore Energy Sistem’s Technical Service will not assume any loss of the above mentioned information. Accordingly, it is recommended to remove any data or personal information from its internal memory before you send the product or to send it only with the original factory default values.

Specifications are subject to change without notice.